Filter
Top Products
Programming
To program Personal Speed Dial numbers:
■
■
■
Using
1.
2.
3.
4.
5.
6.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Dial the number of the extension to be programmed with this feature.
Assign a two-digit code to the number by pressing [
Feature ] and two digits
between 80 and 99. For example, to assign code 81, press [
Feature ] [ 8 ]
[
1
].
If a number is already assigned to the code, it appears on the display. If
no number is assigned to the code, the display reads:
Blank
Enter the phone number exactly as you would dial it.
At this point:
To program another Personal Speed Dial number, start from Step 3.
To program over an existing number, enter the new number after
selecting the two-digit code.
To remove a Personal Speed Dial number, enter the number’s two-digit
code and press [
Mic ] once.
Continue programming or exit programming mode.
System Phone
You can lift the handset or press [ Spkr ] before dialing:
1.
If you want to call on a specific line, press the line button (or press [
Intercom ]
[
8 ] and the two-digit line number).
2.
Press [
Feature ].
3.
Dial the two-digit Personal Speed Dial code (80–99).
If you did not specify an outside line, the system automatically selects one,
turns on the speaker if the handset is in the cradle, and dials the number.
The number being dialed shows on a display phone.
Standard Phone
You can dial Personal Speed Dial numbers on a standard phone, but the
numbers must be programmed from extension 10 or 11. To dial a programmed
Personal Speed Dial number:
1. Lift the handset.
You hear intercom dial tone.
2.
Press [
#
].
3.
Dial the two-digit Personal Speed Dial code (80–99).
The system automatically selects an outside line and dials the number.
5-124 Personal Speed Dial Numbers