Filter
Top Products
Programming
To identify an emergency phone extension:
Using
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 1 ] [ 1 ].
2.
At the Extension: prompt, enter the emergency phone extension number—
see “Valid Entries” on the previous page. For example, to program
extension 30 as the emergency phone, press [
3
] [
0
].
3.
To assign or unassign the extension, press [
Next Data ] until the appropriate
value displays.
4. To program another extension, press [
Next Item ] or [ Prev Item ] until the extension
number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
To program the emergency phone number as Personal Speed Dial code 80:
1.
2.
3.
4.
5.
1.
2.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Dial the extension number of the emergency phone.
Press [
Feature
] [
8
] [
0
].
Enter the emergency phone number exactly as you would dial it.
Continue programming or exit programming mode.
Lift the handset of the emergency phone.
After approximately two seconds, the programmed emergency number is
dialed automatically.
When the call is answered, speak into the handset.
5-64 Emergency Telephone (#311)