Filter
Top Products
Programming
To program a Call Forwarding button:
■
■
■
Using
1.
2.
3.
4.
5.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Enter the number of the extension to be programmed with this feature.
Press a programmable button.
At this point, you can:
Press [
Feature
] [
1
] [
1
], or
Press [ Feature ] [ 1 ] [ 1 ] and the number of the originating extension, or
Press [
Feature ] [ 1 ] [ 1 ], the number of the originating extension, and the
number of the destination extension.
Program another button for this extension or exit programming mode.
System Phone
To forward calls manually:
1.
Press [
Feature ] [ 1 ] [ 1 ].
2. Dial your extension number.
3.
Dial the extension number at which you want the calls to ring.
To remove Call Forwarding manually:
1.
Press [
Feature
] [
1
] [
1
].
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed
on the button, Call Forwarding is activated (on a button with lights, the
green light is on). Skip Steps 2 and 3.
2.
If no originating extension was programmed, dial your extension number.
3.
If no destination extension was programmed, dial the extension number at
which you want the calls to ring.
Call Forwarding is activated (on a button with lights, the green light is on).
5-28
Call Forwarding/Call Follow-Me (F11,XX,XX)