Filter
Top Products
System Speed Dial Numbers
(p. 5-140)
SYSTEM RESET – PROGRAMMING SAVED
(p. 5-139)
To program a number:
To remove a number:
IMPORTANT: Using this procedure
PRESS [
Feature
] [
0
] [
0
] to enter programming mode
PRESS [
Feature
] [
0
] [
0
] to enter programming
disconnects any active calls but retains system
PRESS [
Feature
]
mode
settings. Use it only if the system fails to function
DIAL a two-digit code (20–79)
PRESS [
Feature
]
correctly after a power failure or down period.
DIAL the telephone number—up to 20 digits
DIAL the System Speed Dial number's
code (20–79)
DIAL #728
including special characters (see page 5-134)
To “mark” it (to override restrictions), dial [
★
]
PRESS [
Mic
]
before the telephone number
To remove another number, repeat
To program another number, or to change a
PRESS [
Feature
] [
0
] [
0
] exit programming
number, repeat
mode
PRESS [
Feature
] [
0
] [
0
] to exit programming mode
Dialing Restrictions and Permissions
Groups
Auxiliary Equipment
OUTCALLING CALL RESTRICTION
DIAL
#401
(p. 5-118)
DIAL an extension number
DIAL
1 = No Restriction ✔
2 = Inside (intercom) Only
3 = Local (intercom and
local) only
PRESS [
Next Item
] to program another
extension
TOLL CALL PREFIX
(p. 5-144)
DIAL #402
DIAL
1 = 0/1 plus Area Code and
Number ✔
2 = Area Code and Number
Only
HOTLINE
(p. 5-86)
DIAL #603
DIAL the hotline extension number
(not ext. 10, 16, 22, 28, 34, 40,
46, or 52)
extension
SYSTEM PASSWORD
(p. 5-138)
DIAL #403
DIAL four digits to set the password
DIAL
DISALLOWED PHONE NUMBER
LISTS
(p. 5-52)
DIAL #404
DIAL a list number (1–4)
DIAL a list entry (01–10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [
Enter
]
PRESS [
Remove
] to remove a list entry
PRESS [
Next Item
] to program another
list entry
DOORPHONE 2 EXTENSION
DIAL #605
(p. 5-60)
DIAL an extension number (12–15,
18–21, 24–27, 30–33, 36-39,
42-45, 48-51, or 54-57)
To program another list:
PRESS [
Next Procedure
] [
Prev Procedure
],
enter a new list number, and
NIGHT SERVICE GROUP EXTENSIONS
DIAL #504
(p. 5-116)
DIAL an extension number
DIAL
1
= Assigned to group
2
= Not Assigned to group
✔
PRESS [
Next Item
] to assign another
extension
repeat above steps
DISALLOWED LIST ASSIGNMENTS
DIAL #405 (p. 5-51)
DIAL an extension number
DIAL a list number (1–4)
DIAL
1 = Assigned
2 = Not Assigned ✔
PRESS [
Next Item
] to assign another
list
FORCED ACCOUNT CODE LIST
DIAL #505
(P. 5-71)
DIAL a list entry (01–99)
To program another extension:
PRESS [
Next Procedure
] [
Prev Procedure
],
enter a new extension
number, and repeat above
steps
EMERGENCY PHONE NUMBER
LIST
(p. 5-61)
DIAL #406
DIAL a list entry (01–10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [
Enter
]
PRESS [
Remove
] to remove a list entry
PRESS [
Next Item
] to program another
list entry
ALLOWED PHONE NUMBER
LISTS
(p. 5-8)
DIAL #407
DIAL a list number (1–4)
DIAL a list entry (01–10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [
Enter
]
PRESS [
Remove
] to remove a list entry
PRESS [
Next Item
] to program another
list entry
To program another list:
PRESS [
Next Procedure
] [
Prev Procedure
],
enter a new list number, and
repeat above steps
ALLOWED LIST ASSIGNMENTS
DIAL #408
(p. 5-7)
DIAL an extension number (10–57)
DIAL a list number (1–4)
DIAL
1 = Assigned
2 = Not Assigned ✔
PRESS [
Next Item
] to assign another list
To program another extension:
PRESS [
Next Procedure
] [
Prev Procedure
],
enter a new extension
number, end repeat above
steps
extension
To add entry:
DIAL
the account code (up to
6 digits)
PRESS [
Enter
]
PRESS [
Remove
] to remove a list entry
PICKUP GROUP EXTENSIONS
DIAL #501
(p. 5-125)
DIAL a group number (1–4)
DIAL an extension number
DIAL
1
= Assigned to group
2
= Not Assigned to group
✔
PRESS [
Next Item
] to assign another
extension
CALLING GROUP EXTENSIONS
DIAL #502
(p. 5-35)
DIAL a group number (1–4)
DIAL an extension number
DIAL
1
= Assigned to group
2
= Not Assigned to group
✔
PRESS [
Next Item
] to assign another
VMS HUNT DELAY
(p. 5-153)
DIAL #506
DIAL
1
= Immediate
✔
2
= Delayed
VMS HUNT SCHEDULE
DIAL #507
(p. 5-154)
DIAL
1
= Always
✔
2
= Day Only
3
= Night Only
AA EXTENSIONS
(p. 5-2)
DIAL #607
DIAL an extension number
DIAL
1
= Assigned
2
= Not Assigned
✔
PRESS [
Next Item
] to assign another
extension
PRESS [
Next Item
] to program another
list entry
= Factory setting
= Button with lights required
NIGNT SERVICE BUTTON
DIAL #503
(p. 5-114)
1 = Assigned
2 = Not Assigned ✔
3 = Select button then
press a programmable
button (to assign Night
Service to that button)
If you use option 3
after
a
Night Service button has
been assigned, the Night
Service button moves from the
old button to the new button
you select.
FAX MACHINES EXTENSIONS
DIAL #601
(p. 5-68)
DIAL an extension number
DIAL
1 = Assigned
2 = Not Assigned ✔
PRESS [
Next Item
] to identify another
extension
MUSIC ON HOLD
(p. 5-112)
DIAL #602
DIAL
1 = Active ✔
2 = Not Active
DIAL the alerted extension number
(not the hotline) or [
7
] [
0
] to
paging system
To remove the hotline and alert:
PRESS [
Remove
]
DOORPHONE 1 EXTENSION
DIAL #604
(p. 5-60)
DIAL an extension number (12–15,
18–21, 24–27, 30–33, 36-39,
42-45, 48-51, or 54-57)
HUNT GROUP EXTENSIONS
DIAL #505
(p. 5-88)
DIAL a group number (1-6, 7 for VMS)
DIAL an extension number
DIAL
1
= Assigned to group
2
= Not Assigned to group
✔
PRESS [
Next Item
] to assign another
DOORPHONE ALERT EXTENSIONS
DIAL #606
(p. 5-59)
DIAL an extension number (except
a doorphone extension)
DIAL
1 = Not an alert ✔
2 = Doorphone 1 alert
3 = Doorphone 2 alert
4 = Doorphones 1 and 2
PRESS [
Next Item
] to identify another
extension (up to 48 alert
extensions per doorphone)
SMDR RECORD TYPE
(p. 5-132)
DIAL #608
DIAL
1 = All calls ✔
2 = Outgoing calls only
SMDR TOP OF PAGE
(p. 5-133)
DIAL #609
✔