Filter
Top Products
Programming
To assign a name to an extension:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the number of the extension to be programmed. For example, to
program extension 12, press [
1
] [
2
].
3.
Press left [
Intercom ]. For extension 12, the display reads:
12 Enter name
If a name was previously assigned to this extension, it displays instead.
4. Enter the two-digit code for each character you want to enter. (See Table 5-1
for codes.) For example, to enter the name Andy, press [
2
][
1
] [
6
][
2
] [
3
][
1
]
[
9
][
3
]. The display reads:
12 ANDY
5.
If you make a mistake, you can press [
Mic ] to clear the display. Repeat Step 4
to enter the correct name.
6.
Program a button for this extension or exit programming mode.
Extension Name Display
5-67