Filter
Top Products
Programming
To identify the types of outgoing calls that can be made on all lines at an
extension:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 1 ].
2.
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to select extension 30, press [ 3 ] [ 0 ].
3.
To change the type of call restriction, press (Next Data) until the appropriate
value displays.
4. To program another extension, press [
Next Item ] or [ Prev Item ] until the extension
number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
Outgoing Call Restriction (#401)
5-119