Filter
Top Products
System Password (#403)
Description
This System Programming procedure defines a four-digit password that users
can enter from system phones other than the MLC-6. The password has two
possible functions:
To turn Night Service on and off (if Night Service is programmed).
To override dialing restrictions (if the extension has access to an outside
line).
Related Features
■
■
■
■
Once a password is programmed, you must enter it to turn Night Service on
or off. Additionally, if Night Service is on, users in the Night Service Group
must enter the password to make outgoing calls (except numbers on the
Emergency Phone Number List (#406) and Marked System Speed Dial
Numbers). Dialing restrictions for extensions not in the Night Service Group
remain the same as during normal daytime operation.
The password overrides all dialing restrictions, but not Line Access
Restriction (#302).
Considerations
This feature is not available on MLC-6 or standard phones.
Programming
To program a System Password:
Using
1.
2.
3.
1.
2.
3.
4.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 3 ]. The
display reads:
Set Password
Data----
Enter a password up to four digits.
Select another procedure or exit programming mode.
Before lifting the handset or turning on the speaker at a system phone,
press [
Hold ].
Enter the password.
The System Password does not appear on display phones.
Press an outside line button (or press [
Intercom ] [ 8 ] and the two-digit line
number) and lift the handset.
Dial the number.
The password is in effect until you hang up the phone.
5-138
System Password (#403)