Filter
Top Products
Programming
To restrict an extension from making calls on a specific line:
1.
2.
3.
4.
5.
6.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 2 ].
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to program extension 23, press [ 2 ] [ 3 ].
At the Line: prompt, enter the line number to be restricted at this extension.
For example, to restrict line 2, press [
0 ] [ 2 ]. The current restriction
displays.
To change the line restriction for this extension, press [
Next Data ] until the
appropriate value displays—see “Valid Entries” on the previous page.
At this point:
To restrict another line at this extension, press [
Next Item ] or [ Prev Item ]
until the line number shows on the display. Then repeat Step 4.
To restrict another extension, press [
Next Procedure ] [ Prev Procedure ] and
begin at Step 2.
Select another procedure or exit programming mode.
■
■
Line Access Restriction (#302) 5-95