Filter
Top Products
Save Number Redial (F04)
Description
This feature saves the last outside number dialed from an extension with a
system phone into temporary memory. Users can use this feature to save a
number before they hang up on a busy or non-answering call. Once saved, the
number can be redialed again at any time. The number stays in memory until a
different one is saved.
Related Features
Unlike Last Number Redial, this feature lets the user make other calls
before redialing the saved number.
System Speed Dial Numbers cannot be saved using this feature.
Considerations
■
■
■
■
■
■
This feature redials all digits dialed on the outside call for which the feature
was used, except account codes.
You can program a Save Number Redial button on a system phone to
access the feature with one touch. If you do so, you can press the button to
save the number and press the button at a later time to redial the number.
You can program this feature on more than one button to save more than
one number.
This feature is available only on system phones.
Programming
To program a Save Number Redial button:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press [
Feature ] [ 0 ] [ 4 ].
5.
Program another button for this extension or exit programming mode.
Using
To save a number:
From a system phone, press the programmed button or press [ Feature ] [ 0 ] [ 4 ]
after dialing the number, but before hanging up.
To redial a saved number:
Press the programmed button again or press [ Feature ] [ 0 ] [ 4 ] again.
Save Number Redial (F04)
5-131