Filter
Top Products
VMS Hunt Schedule (#507)
Description
This System Programming procedure determines whether the outside lines
assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only
during Day operation (Night Service is off), or only during Night operation (Night
Service is on). This feature affects only the Automated Attendant Service of the
voice messaging system.
Related Features
■
■
■
You must use Group Call Distribution (#206) to assign lines to
Hunt Group 7.
You must use Hunt Group Extensions (#505) to assign the extensions
associated with the voice messaging system hardware to Hunt Group 7.
If you set the VMS Hunt Schedule for Day Only or Night Only, you must use
Night Service Button (#503) to program a Night Service button for
extension 10.
Considerations
This feature applies only if you have a voice messaging system.
Valid Entries
1 = Always ✔
2 = Day Only
3 = Night Only
Programming
To change the VMS Hunt Schedule setting for the voice messaging system’s
Automated Attendant Service:
1. Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 7 ].
2.
Press [
Next Data ] until the appropriate value displays.
3. Select another procedure or exit programming mode.
5-154
VMS Hunt Schedule (#507)