Filter
Top Products
Valid Entries
Any phone number—up to 20 characters consisting of the digits 0–9, [ ✳ ], [ # ],
and special dialing functions that you can access by pressing [
Hold ] (Pause),
[
Mic ] (Stop), [ Spkr ] (Recall), and [ Transfer ] (Touch-Tone Enable)—assigned to
codes 20 through 79
No number assigned to any code ✔
Programming
To program System Speed Dial numbers:
1.
2.
3.
4.
5.
Press [
Feature ] [ 0 ] [ 0 ]. The display reads:
Program Ext 10
Assign a two-digit code to the number by pressing [ Feature ] and two digits
between 20 and 79. For example, to assign code 20, press [
Feature ] [ 2 ]
[
0
].
If a number is already assigned to the code, it appears on the display. If
no number is assigned to the code, the display reads:
Blank
Enter the number. For example, to program 555 4757, Press [
5
] [
5
] [
5
] [
4
] [
7
]
[ 5 ] [ 7 ]. The display reads:
5554757
To mark the System Speed Dial number, precede the number by a [ ✳ ].
For example, to mark the number 555 1001, enter [
✳
] [
5
] [
5
] [
5
] [
1
] [
0
] [
0
]
[ 1 ]. The display reads:
*5551001
At this point:
To program another System Speed Dial number, start from Step 2.
To program over an existing number, enter the new number after
selecting the two-digit code.
To remove a System Speed Dial number, enter the number’s two-digit
code and press [
Mic ] once.
Press [
Feature
] [
0
] [
0
] to exit programming mode.
■
■
■
System Speed Dial Numbers 5-141