Filter
Top Products
Programming
To create an Emergency Phone Number List:
1.
2.
3.
4.
5.
6.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 6 ]. The
display reads:
EmergencyList
Entry:
Select a list entry (01–10). For example, to select the third entry, press [ 0 ] [ 3 ].
The display reads:
EmergencyList 03
Data------------
Enter the telephone number.
To save the telephone number in memory, you must press [
Enter ].
At this point:
To enter other phone numbers, press [
Next Item ] to select a different list
entry and repeat Steps 3 and 4.
■
■
■
To change the phone number you just entered, press [ Remove ] and
enter the correct phone number, then press [
Enter ].
To delete the phone number you just entered, press [
Remove ].
Select another procedure or exit programming mode.
5-62 Emergency Phone Number List (#406)