Filter
Top Products
Pickup Group Extensions (#501)
Description
This System Programming procedure lets you assign extensions to a Pickup
Group. When a call rings at an extension in a Pickup Group, a user at any other
extension in the system can answer the ringing line by dialing the Pickup Group
code. The Pickup Group feature is useful when a user needs to answer calls on
lines not assigned to his or her phone. The system supports up to four Pickup
Groups.
Related Features
For instructions on answering calls in a Pickup Group, see Group Pickup.
Considerations
■
An extension can be assigned to as many as four different Pickup Groups.
■
Extensions where extra alerts (such as a loud bell) are installed can be
assigned to a Pickup Group, to enable anyone who hears the alert to answer
the call.
Valid Entries
1 = Assigned to group
2 = Not Assigned to group ✔
Programming
To assign extensions to a Pickup Group:
1.
2.
3.
4.
5.
6.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 1 ].
At the Group: prompt, enter a group number (1–4). For example, to select
group 1, press [
1 ]. The display reads:
Pickup Group 1
Extension:
Enter the number of the extension to be programmed. For example, to
program extension 29, press [
2
] [
9
].
To assign or unassign the extension, press [ Next Data ] until the appropriate
value displays.
At this point:
■
■
To assign or unassign another extension, press [ Next Item ] or [ Prev Item ]
until the extension number shows on the display. Then repeat Step 4.
To program another group, press [
Next Procedure ] [ Prev Procedure ] and
enter a new group number. Then repeat Steps 3 and 4.
Select another procedure or exit programming mode.
Pickup Group Extensions (#501)
5-125