Filter
Top Products
System Reset—Programming Saved
(#728)
Description
This System Programming procedure resets the system while retaining the
currently programmed settings. Reset the system only when it fails to function
correctly after a power failure or down period.
Considerations
■
■
■
■
■
Using
This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code directly.
The system reset begins immediately and takes only a few seconds.
Resetting the system disconnects all active calls.
Resetting the system resets any active features at an extension to the
programmed settings. For example, if an extension has calls forwarded to
another extension, resetting the system turns off Call Forwarding (if the
feature is programmed on a button with lights, the reset also turns off the
light for the Call Forwarding button).
You cannot interrupt the reset process or use any telephones in the system
during the reset process.
To reset the system:
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 7 ] [ 2 ] [ 8 ]. The display
reads:
Reset-Save All
When the reset is completed, the system is no longer in programming mode and
the date and time appear on the display. If a power failure has occurred, the
time may not be correct; change it using System Time (#103).
System Reset—Programming Saved (#728)
5-139