Filter
Top Products
Programming
To program a Manual Signaling button:
1.
2.
3.
4.
5.
Press [
Feature ] [ 1 ] [ 3 ].
6.
Using
■
■
■
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Enter the number of the extension to be programmed with this feature.
Press a programmable button.
Dial the two-digit extension number of the destination extension. For example,
to identify extension 22 as the destination extension, press [
2
] [
2
]. (Enter
[ ✳ ] before the extension number if you want to use the button for voice
signaling.)
Program another button for this extension or exit programming mode.
To manually signal the target extension:
While the handset is in the cradle, press the programmed button. The
extension beeps for as long as the button is pressed.
To ring or voice signal the target extension:
Lift the handset or press [ Spkr ], then press [ Intercom ] and the programmed
button.
To transfer a call to the target extension:
While active on the call, press [ Transfer ] then the programmed button.
Manual Signaling (F13XX or F13*XX)
5-107