Filter
Top Products
Programming
To program a Wake Up Service button at extension 10:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 5 ].
2.
At this point:
■
■
■
If you want to assign Wake Up Service to the first available button on
the system phone, press [
Next Data ] until the display reads:
Wake Up Button
1 Assigned-Ext10
If you want to remove the Wake Up Service button assignment, press
[
Next Data ] until the display reads:
Wake Up Button
2 Not Assigned
If you want to assign Wake Up Service to a specific button, press [
3 ].
The display reads:
Wake Up Button
3 Select Button
Then press a programmable button with lights to assign Wake Up Service
to that button.
3.
Select another procedure or exit programming mode.
4. Label the Wake Up Service button at extension 10.
Using
To schedule a wake up call for a specific extension:
1.
Press the Wake Up Service button on extension 10.
The green light next to the Wake Up Service button flutters. Wake Up
Service is activated and the display reads:
Wake Up
2. Dial the two-digit extension number of the desired extension (or use an Auto
Dial button). For example, to schedule a wake up call for extension 32,
press [
3 ] [ 2 ]. The display reads:
Wake Up 32 --:--
3.
Enter the wake-up time in 24-hour notation. For example, to set the time to
2:15 p.m., press [
1 ] [ 4 ] [ 1 ] [ 5 ]. When you have finished entering the time,
the display reads:
Wake Up 32 14:15
The wake up call is scheduled, and the green light next to the Wake Up
Service button turns off.
5-160 Wake Up Service Button (#115)