Filter
Top Products
Programming
Using
To assign or unassign an Automatic System Answer button with lights at
extension 10:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 1 ].
2.
If you want to assign Automatic System Answer to the first available button on
the system phone, press [
Next Data ] until the display reads:
ASA Button
1 Assigned-Ext10
If you want to unassign Automatic System Answer, press [ Next Data ] until
the display reads:
ASA Button
2 Not Assigned
If you want to assign Automatic System Answer to a specific button, press
[
3 ]. The display reads:
ASA Button
3 Select Button
Then press a programmable button with lights to assign Automatic System
Answer to that button.
3.
Select another procedure or exit programming mode.
4.
Label the Automatic System Answer button at extension 10.
To turn Automatic System Answer on:
Press the Automatic System Answer button at extension 10.
The light is steady green and Automatic System Answer is on. If calls are
ringing when Automatic System Answer is turned on, the calls will be answered
immediately by the system.
To turn Automatic System Answer off:
Press the Automatic System Answer button at extension 10.
The green light goes out and Automatic System Answer is off. Any calls in the
process of being answered by the system will continue to hear the recorded
message and will be placed on hold.
5-18
Automatic System Answer Button (#111)