Filter
Top Products
Message Light On (F09XX)
Description
This feature turns on the message light at a specified extension (where XX is an
extension number from 10–57).
Related Features
For instructions on turning off the message light, see Message Light Off.
Considerations
■
■
■
■
■
This feature turns on the message light on system phones and standard
phones that have message lights. (See “Standard Telephones” in Chapter 1
for a list of standard phones that have message lights.) Any type of phone
can turn on or off a message light.
For message waiting capability, standard phones with message waiting
lights must be connected to an R3.1 206 module and the system must be
equipped with an R3.1 primary processor module.
Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns on the
message light at a subscriber’s extension when a message is left in the
mailbox.
If you use this feature to signal someone at a doorphone extension, you
must use Message Light Off to turn the light off.
You can program a Message Light On button on a system phone to turn the
message light on at a specific extension with one touch.
Programming
To program a Message Light On button:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
3.
4.
5.
6.
Enter the number of the extension to be programmed with this feature.
Press a programmable button.
Press [
Feature
] [
0
] [
9
].
Optionally, dial the two-digit extension number of your most common
destination, or skip to Step 6 if you want only the feature code on the
button.
Program another button for this extension or exit programing mode.
5-110 Message Light On (F09XX)