Filter
Top Products
Feature and Planning Review
The parameters groups are:
Voice System Parameters
— Voice Mail Parameters. Voice Mail parameters are specific to
AUDIX Voice Power. In the co-resident configuration you do not
have to fill in these fields since they have already been populated
by the system. Consult the
AUDIX Voice Power
TM
System
Manager’s Guide
for further information.
— Automated Attendant Parameters. Automated Attendant
parameters are specific to AUDIX Voice Power. In the co-resident
configuration you do not have to fill in these fields since they have
already been populated by the system. Consult the
AUDIX Voice
Power
TM
System Manager’s Guide
for further information.
— Message Waiting Lamp Parameters. Message Waiting Lamp
parameters affect only the operation of message waiting lamps.
The Code to Light and Code to Extinguish parameters are
set automatically to the values preprinted on Form EA and must not
be changed. The default value for Refresh? is
yes
. It is
recommended that the value for Refresh? be changed to
no
.
Consult the
AT&T AUDIX Voice Power
TM
/FAX Attendant System
TM
Planning and Implementation
document for further information.
Fax System Parameters
— General Fax Parameters. General Fax parameters affect all fax
services. You determine the correct values to use according to the
requirements for your business.
— Fax Response Parameters. Fax Response parameters affect the
Fax Response Service. You determine the correct values to use
according to the requirements for your business.
Fax Account Code Parameter Administration
The Account Code feature of FAX Attendant allows you to use the MERLIN
LEGEND Communications System Station Message Detail Recording (SMDR)
feature to prepare reports on outbound fax usage by account number. With these
reports, you can determine how much fax transmission time each subscriber
used and then bill the respective departments. Account codes are optional and
can be left blank. If you plan to use the account code feature, you will need to
obtain the necessary parameter values from your Switch Administrator. Enter the
account code parameters on FORM FF1 in the
AT&T AUDIX Voice Power
TM
/FAX
Attendant System
TM
Planning and Implementation
document. Use FORM FF2
(on the back of FORM FF1) to enter account codes. These codes can be stored
in the system and retrieved during subscriber administration for easier data entry.
2-5