Filter
Top Products
System Operations
message will display telling you to examine the Most Recent Audit
report.
8. When prompted, press
Enter
to return to the System Control menu.
Shutting Down and Rebooting the UNIX
System
There are specific steps you should follow to shut down the UNIX system and
avoid damaging the files. Shutting down the UNIX system without stopping the
voice system causes any calls in process to terminate rather than allowing them
to complete. You should stop the voice system before shutting down the UNIX
system. To protect the data stored on the hard disk, this procedure must always
be performed before turning off power to the system and before moving the
hardware.
1. At the Console Login: prompt, type
is
and press
Enter
.
— If a password has been administered, the system prompts you to
enter your password. In this case, proceed to step 2.
— If no password has been administered, the Status Screen appears,
proceed to step 3.
2. At the Password: prompt, type your password and press
Enter
. (For
security reasons, your password does not appear on the screen as you
type it in.)
— The Status Screen appears.
NOTE:
For comprehensive instructions on how to interpret the status
screen items, see the
Integrated Solution III System Manager’s
Guide.
3. At the Status Screen, type your name and press
F3 (SAVE).
— The system records your name in the Status Screen Access Log.
The Integrated Solution III (IS-III) Main Menu appears.
4. At the Integrated Solution III menu, move the cursor to User
Maintenance and press
Enter
.
— The User Maintenance menu appears.
5. At the User Maintenance Menu, move the cursor to System Shutdown
and press
Enter
.
— The Shutdown screen appears.
6. Press
F3 (CONT) to shut down the system.
— The system shuts down and then a reboot prompt appears.
7. Press
Ctrl
-
Alt
-
Del
to reboot the system, or press the power button to
turn off the machine.
5-9