Filter
Top Products
System Operations
Caller Input is the touch-tone digits input by the last or current caller
serviced on this channel.
Dialed Digits is the digits dialed on this channel by FAX Attendant to
service the last or current caller.
Changing the Refresh Rate
The refresh rate determines how frequently the the system monitor is
automatically updated.
By default, the System Monitor refreshes every five seconds. To change the
refresh rate, follow these steps:
1. Press
F8 (CHG-KEYS) to activate the alternate keys.
2. Press
F1 (CHG-RATE).
— The Change Refresh Rate window opens.
3. Enter a new refresh rate from 1 to 30 seconds.
4. Press
F3 (SAVE) to activate the new refresh rate.
Changing the State of Voice Channels
After recovering from errors, you may need to place voice channels back in
service. For testing, you may wish to place voice channels manually out of
service. To change the state of a voice channel, follow these steps:
1. At the Configuration Management menu, move the cursor to Voice
Equipment and press
Enter
.
— The Voice Equipment window appears.
2. Press the
F8 (CHG-KEYS) function key.
3. Press the
F2 (CHGSTATE) function key.
— A window opens requesting the identification of the equipment
whose state is to be changed and the new state it is to assume.
4. Press the
F2 (CHOICES) function key.
— A menu of choices is displayed.
5. Select either INSERV (in service) or MANOOS (manual out of service) from
the menu and press
Enter
.
— The selection is entered in the new state field.
6. Press
Enter
to move to the Equipment field.
7. Press the
F2 (CHOICES) function key.
— A menu of choices is displayed.
8. Select Channel from the menu and press
Enter
.
5-11