Filter
Top Products
Voicemail Pro Installation and Maintenance Page 394
15-601063 Issue 22e (16 May 2010)IP Office Release 6
7.5.6 Configuring an Analog Extension Number for Fax Use
If the PC that is being used as the fax server uses an analog fax card, it must be connected to an IP Office analog
extension (POT) port. You are then ready to configure the analog extension for fax use.
To configure an analog extension number for fax use:
1.
In IP Office Manager, display the extension details for the extension that you are using for the fax.
2.
View the Extn tab.
3.
In the Caller Display Type field, select DTMFF.
3.
View the Analogue tab.
4.
Set up the incoming DDI routing of calls to specific users as required.
· Tip
If the fax board can support multiple lines, you can configure them as a group. The group number can then be used as
the fax destination instead of an individual extension number.
The next step is to set the Voicemail Pro system fax number. See Setting the Voicemail Pro System Fax Number .
390