Filter
Top Products
Voicemail Pro Installation and Maintenance Page 246
15-601063 Issue 22e (16 May 2010)IP Office Release 6
4.9.4 Test Variable
For Voicemail Pro 4.2+, the Test Variable action has been added and replaces the previous Check Digits action. It
allows calls to be routed based on matching the value of a call variable to a specified value.
Settings
1.
Click the Conditions Actions icon and select Test Variable.
2.
The General , Entry Prompts , Reporting and Results tabs are standard tabs available to all
actions.
3.
The following controls are available on the Specific tab:
· Select the variable to Match
This drop-down list is used to select which Voicemail Pro call variable should be checked for a match, see
below.
· Select the parameter(s) to test the variable against
Select the types of values that should be checked for a match and if necessary entry the value. If several
options are selected, the Voicemail Pro checks for a match starting from the top and working down until a
match occurs.
· Variable
Check for a match against the value of another selected call variable . Type the required value directly
or use the browse button to select the text that should be used including using a the value of a call
variable .
· Specific
Check for a match against the value entered in the adjacent field.
· Extn
Check for a match against valid extensions on the IP Office.
· Hunt Group
Check for a match against hunt group extension numbers.
· Mailbox
Check for a match against mailboxes.
· Timeout after
The timeout value is used only if $KEY is selected as the variable to match. In this case, if the Voicemail Pro
will wait for the specified timeout period for the caller to dial a new value of $KEY. To enter a value without
waiting for the timeout to expire the user can be prompted to enter a value and then press #.
176 177 182 183
157
157
157