Filter
Top Products
Voicemail Pro Installation and Maintenance Page 18
15-601063 Issue 22e (16 May 2010)IP Office Release 6
2. Installing Voicemail Pro
Voicemail Pro 6.0 can be installed with the following IP Office systems running IP Office Release 6 software:
· IP406 V2.
· IP412.
· IP Office 500.
· IP Office 500 V2.
2.1 General Installation Requirements
Here is a list of general requirements for all types of voicemail installation.
· A PC with IP Office Manager and Microsoft .NET Framework versions 2.0 installed on it. If .NET 2.0 is not detected,
you will be prompted to install it before the Voicemail Pro installation proceeds.
· An IP Office Feature Key and if necessary (ie. for parallel and USB feature keys) a PC running the IP Office Feature
Key Server application. Refer to the IP Office Installation Manual for details.
· Licenses based on the serial number of the IP Office Feature Key. This should include:
· A license for Voicemail Pro and any additional voicemail ports is required. If Voicemail Pro Server is installed
without a license it will run for 2 hours and then shut down.
· Licenses for any other Voicemail Pro components being installed, see Voicemail Pro Licenses .
· IP Office Applications DVD.
Tips
· Before you start to install Voicemail Pro it is advisable to check that the PC that you are using can connect to the IP
Office unit and that you can load and save a configuration file using IP Office Manager.
· Switch off any PC and hard disk sleep, power down, suspend, hibernation modes.
· The Voicemail Pro software needs to be installed using an account with full administrator rights on the PC. The service
subsequently runs under that account. We recommend that a specific account is created for this purpose and set so that
its password does not expire.
22