Avaya 6 IP Phone User Manual


 
Voicemail Pro Installation and Maintenance Page 39
15-601063 Issue 22e (16 May 2010)IP Office Release 6
Installing Voicemail Pro: UMS Web Services
Installing the Voicemail Pro IMAP Server
The IMAP server is installed as a standard part of the Voicemail Pro service installation. It uses the IP address of the
Voicemail Pro server PC and runs on the standard IMAP port 143.
The only special consideration is to avoid having any other IMAP server running on the same PC.
Licensing IP Office for Web Services
UMS web services can be licensed in a number of ways by licenses added to the IP Office configuration:
· User Licensing
User licensing is done as follows.
· Users whose Profile is set to Teleworker User or Power User can be enabled to UMS if required. This
requires Teleworker Profile or Power User Profile licenses.
· User's whose Profile is set to Basic User can be licensed using legacy UMS Web Services licenses.
· Hunt Group Licensing
Hunt groups are licensed by UMS Web Services licenses.
1.
Start IP Office Manager.
2.
Receive the configuration from the IP Office associated with the Voicemail Pro server.
3.
In the Licenses section, add the required licenses.
4.
Merge the configuration back to the IP Office and then receive the configuration again.
5.
In the Licenses section check that the License Status of the licenses is now shown as Valid.
6.
Start the Voicemail Pro client
7.
Select Help | About.
8.
The screen should list the Web Services as Started and should show the number of UMS licenses.
Configure Users for UMS
1.
Start IP Office Manager.
2.
Receive the configuration from the IP Office system hosting the user.
3.
Select User and then select the required user.
4.
Set their Profile to either Teleworker or Power User.
5.
Select the Voicemail tab. Enable UMS Web Services. Click OK.
6.
Merge the configuration back to the IP Office.
Configuring Hunt Groups for UMS
Access to hunt group mailboxes using UMS is supported for Voicemail Pro 5.0+.
1.
Start IP Office Manager.
2.
Receive the configuration from the IP Office system hosting the hunt group.
3.
Select the hunt group.
4.
Click on the Voicemail tab.
5.
Enable UMS Web Services. Click OK.
6.
Merge the configuration back to the IP Office.