Filter
Top Products
42 | SRA 7.0 User Guide
Configuring NetExtender Packet Capture Properties
Within the NetExtender Properties dialog box, click the Packet Capture heading in the menu
on the left panel. The available options allow you to enable and disable packet capture and data
compression on NetExtender.
Note You must have Administrator privileges to change packet capture settings.
Step 1 To enable packet capture, check the Enable NetExtender packet capture check box.
Step 2 If packet capture is enabled, clear all captured packet data when NetExtender exits by checking
the Clear the capture when NetExtender exits check box. To disable packet capture, uncheck
this check box.
Step 3 If packet capture is enabled, clear all captured packet data when NetExtender exits by checking
the Clear the capture when NetExtender exits check box. To retain packet data, uncheck this
check box.
Step 4 To enable data compression of captured packets, check the Enable data compression check
box. To disable data compression the next time NetExtender is connected, uncheck this box. If
packet capture is enabled when NetExtender connects and you want to disable data
compression immediately (instead of waiting until the next time NetExtender is connected),
check the Attempt to disable data compression during packet capture check box.
Step 5 Click Apply to save your changes.