Filter
Top Products
Using NetExtender | 37
Configuring NetExtender Connection Scripts
Dell SonicWALL SSL VPN provides users with the ability to run batch file scripts when
NetExtender connects and disconnects. The scripts can be used to map or disconnect network
drives and printers, launch applications, or open files or Web sites. To configure NetExtender
Connection Scripts, perform the following tasks.
Step 1 Right click the icon in the task bar and click Properties... The NetExtender Preferences
window is displayed.
Step 2 Click Connection Scripts.
Step 3 To enable the domain login script, select the Attempt to execute domain logon script check
box. When enabled, NetExtender will attempt to contact the domain controller and execute the
login script. Optionally, you may now also select to Hide the console window. If this check box
is not selected, the DOS console window will remain open while the script runs.
Note Enabling this feature may cause connection delays while remote client’s printers
and drives are mapped. Make sure the domain controller and any machines in the
logon script are accessible via NetExtender routes.
Step 4 To enable the script that runs when NetExtender connects, select the Automatically execute
the batch file “NxConnect.bat” check box. Optionally, you may now also select to Hide the
console window. If this check box is not selected, the DOS console window will remain open
while the script runs.
Step 5 To enable the script that runs when NetExtender disconnects, select the Automatically
execute the batch file “NxDisconnect.bat” check box.
Step 6 Click Apply.