Filter
Top Products
4-5
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Chapter 4 Configuring Network Settings on the Cisco IP Phone
Verifying Network Settings
Using the Phone’s Network Configuration Screen (Cisco IP Phone Models 7905G/7912G)
Procedure
Step 1 Press the Menu button.
Step 2 Use the Navigation button to select Settings, and then press the Select softkey.
Step 3 Use the Navigation button to select Network Configuration, and then press the
Select softkey.
Step 4 Scroll through the options to display the settings described in Table 4-1.
Table 4-1 Network Settings
Network Setting Description Usage Notes
DHCP Server Displays IP address of the Dynamic Host
Configuration Protocol (DHCP) server
that the phone uses to obtain IP address.
See the “Modifying DHCP
Settings” section on page 4-9.
BootP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server rather than a DHCP server.
Always displays No.
Cannot be configured.
MAC Address Identifies the unique Media Access
Control (MAC) address of the phone.
Cannot configure.
Host Name Identifies the unique host name assigned
to the phone.
Obtained from the DHCP
server.
Domain Name Identifies the name of the Domain Name
System (DNS) domain in which the phone
resides.
See the “Assigning a Domain
Name” section on page 4-20.
IP Address Indicates the Internet Protocol (IP)
address of the phone.
See the “Assigning an IP
Address” section on
page 4-15.
Subnet Mask Indicates the subnet mask used by the
phone.
See the “Assigning a Subnet
Mask” section on page 4-19.