Filter
Top Products
Chapter 4 Configuring Network Settings on the Cisco IP Phone
Verifying Network Settings
4-4
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Verifying Network Settings
On Cisco IP Phone models 7905G/7912G, you can view detailed information
about the current network settings of the phone. Use this information to
troubleshoot or to make modifications.
For the Cisco IP Phone 7902G, you can obtain detailed information about current
network settings from the Phone Configuration web page or through the IVR
system.
To display current network settings for the Cisco IP Phone, follow these steps:
Using the Phone Configuration Web Page (Cisco IP Phone Models 7902G/7905G/7912G)
Procedure
Step 1 Open the Phone Configuration web page.
a. Open your web browser and enter the following URL, where IPaddress is the
IP address of your phone
http://IPaddress
b. Press Enter.
The Phone Configuration web page appears.
Step 2 In the pane on the left:
a. Select Network Configuration to review network configuration information.
b. Select Network Statistics to view network statistics.
On the Cisco IP Phone 7902G, you can also review phone settings using the IVR
system. See the “Using the Interactive Voice Response (IVR) System on the
Cisco IP Phone 7902G” section on page A-22.