Cisco Systems 7902G IP Phone User Manual


 
A-13
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Appendix A Additional Configuration Methods, Parameters, and Procedures
Configuration Parameters
StaticNetMask Static subnet mask of the
phone when DHCP is not
used.
Enter the subnet mask for the phone.
This value is ignored when the Dhcp parameter is
enabled.
Domain Domain name on the
network in which the phone
operates, used in the
creation of the endpoint
identifier.
Alphanumeric string up to 31 characters.
For example, if the name of the endpoint is aaln1 and
the domain is cisco.com, the endpoint identifier is
aaln1@cisco.com.
0—Use the DHCP-provided domain name if
available; otherwise use the static IP address.
string—Use the specified domain name string
and overwrite any DHCP-provided domain
name.
The default setting is 0.
DnsServer1 IP address of the primary
DNS server.
The address specified overwrites the primary DNS
server address supplied by DHCP. Set 0 or 0.0.0.0 if
you want the phone to use the address supplied by
DHCP.
The default setting is 0.
Note Do not specify a port number. The
Cisco IP Phone uses the default DNS port.
DnsServer2 IP address of the secondary
DNS server.
The address specified overwrites the secondary DNS
server address supplied by DHCP. Set 0 or 0.0.0.0 if
you want the phone to use the address supplied by
DHCP.
The default setting is 0.
Note Do not specify a port number. The
Cisco IP Phone uses the default DNS port.
Table A-1 Network Parameters (continued)
Parameter Description Usage