Cisco Systems 7902G IP Phone User Manual


 
Chapter 1 An Overview of the Cisco IP Phone
Understanding the Requirements for Installing and Configuring the Cisco IP Phone Models 7902G/7905G/7912G
1-12
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Related Topic
Providing Information to Users Via a Web Site, page 5-9
Understanding the Requirements for Installing and
Configuring the Cisco IP Phone Models
7902G/7905G/7912G
To install and configure the Cisco IP Phone models 7902G/7905G/7912G, you
must configure some network settings, set up Cisco CallManager, and make
changes locally on the phone.
Refer to Table 1-2 for an overview of required procedures. For detailed
information about these steps, refer to the sources shown.
Note You can specify additional configuration settings using profile files stored on the
TFTP server. For more information, see Appendix A, “Additional Configuration
Methods, Parameters, and Procedures.”
Table 1-2 Overview of Configuration Procedures for the Cisco IP Phone
Required Task Purpose For More Information
1. If the Cisco IP Phone model that
you want to configure does not
appear in the Phone Type
drop-down list in
Cisco CallManager, go to the
following URL and install the
latest support patch for your
version of Cisco CallManager:
http://www.cisco.com/cgi-bin/
tablebuild.pl/callmgr-33
The support patch allows
Cisco CallManager to identify
a Cisco IP Phone.
Refer to instructions on the
same web page as the
support patch.