Filter
Top Products
A-7
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Appendix A Additional Configuration Methods, Parameters, and Procedures
Web Page Configuring
Step 2 From the phone’s web page, choose the hyperlink for the information that you
want to display or configure:
• Device Information—Display only. For more information, see the “Device
Information” section on page A-8.
• Network Configuration—Display only. For more information, see the
“Network Configuration” section on page A-8.
• Network Statistics—Display only. For more information, see the “Network
Statistics” section on page A-10.
• Device Logs—Display only. For more information, see the “Device Logs”
section on page A-11.
• Network Parameters—Configurable parameters. For more information, see
the “Network Parameters” section on page A-11.
• Tone Parameters—Configurable parameters. For more information, see the
“Tone Parameters” section on page A-16.
• Audio Parameters—Configurable parameters. For more information, see the
“Audio Parameters” section on page A-19.
Step 3 If you selected Network Parameters, Tone Parameters, or Audio Parameters,
follow these steps:
a. If you have set up a password with the UIPassword parameter in the profile
file, enter the password in the UIPassword field, and then click Apply. (If you
want to change the password, enter the new password in the two
ChangeUIPassword fields before clicking Apply.)
b. Make changes to parameters in the Network Parameters, Tone Parameters,
and Audio Parameters areas as needed and lick Apply to save your changes.
Step 4 Close your web browser.
Related Topics
• Device Information, page A-8
• Network Configuration, page A-8
• Network Statistics, page A-10
• Device Logs, page A-11
• Network Parameters, page A-11