Cisco Systems 7902G IP Phone User Manual


 
6-9
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Chapter 6 Troubleshooting the Cisco IP Phone
Erasing the Local Configuration
Cisco IP Phone 7902G
Procedure
Step 1 Lift the handset, then press and hold the Menu button for about 3 seconds.
Step 2 Press # to go to the extended menu.
Step 3 Enter the code # 322873738.
Step 4 Hang up the phone. The phone resets.
Cisco IP Phone Models 7905G/7912G
Procedure
Step 1 Press the Menu button.
Step 2 Use the Navigation button to select Settings, and then press the Select softkey.
Step 3 Use the Navigation button to select Network Configuration, and then press the
Select softkey.
Step 4 Perform either of these procedures:
Procedure A:
Press **2. The phone displays “Do you want to reset all system settings
to default values?”
Press the Ye s softkey.
Procedure B:
Press **#. If your phone displays “Enter Admin Password,” enter your
password and then press the Enter softkey. Make sure that an unlocked
padlock icon appears in the upper-right corner of your LCD.
Scroll to Erase Configuration.
Press the Ye s softkey and then press the Save softkey.
The phone cycles through normal startup procedures.