Filter
Top Products
Chapter 4 Status Screens
P-2612HNU-Fx User’s Guide
92
4.4 Packet Statistics
Click Status > Packet Statistics to access this screen. Read-only information
here includes port status and packet specific statistics. Also provided are "system
up time" and "poll interval(s)". The Poll Interval(s) field is configurable. The
screen varies slightly depending on the WAN mode you set using the DSL/WAN
switch.
Figure 11 Packet Statistics
The following table describes the fields in this screen.
Table 7 Packet Statistics
LABEL DESCRIPTION
WAN Services Statistics
Interface This shows the name of the interface. For the WAN interface a default
name nas followed by a number (for example, nas1) indicates the
DSL interface. The name eth0.14 indicates the default Ethernet WAN
interface (the physical Ethernet WAN port). The number after the dot
(.) represents the VLAN ID number assigned to traffic sent through
this connection.
Description This applies to the WAN connection and shows the service name of the
WAN connection. 1 and 2 or 0 and 1 are the default VPI and VCI
numbers. The last number represents the index number of
connections over the same PVC or the VLAN ID number assigned to
traffic sent through this connection.
Received
Bytes
This field displays the number of bytes received on this port.
Pkts This field displays the number of packets received on this port.
Errs This field displays the number of error packets received on this port.