Filter
Top Products
Chapter 3 Tutorial
P-2612HNU-Fx User’s Guide
76
To configure a static route to route traffic from N1 to N2:
1 Click Advanced > Static Route. Click Add.
2 Configure the Static Route Setup screen using the following settings:
• Select Active.
• Specify a descriptive name for this routing rule.
•Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
•Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
Click Apply. The Advanced > Static Route screen should display the route you
just added.
Now B should be able to receive traffic from A. You may need to additionally
configure B’s firewall settings to allow specific traffic to pass through.
R’s N2 192.168.10.2
B 192.168.10.33
Table 3 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS