Filter
Top Products
Chapter 17 Quality of Service (QoS)
P-2612HNU-Fx User’s Guide
228
You can give different priorities to traffic that the ZyXEL Device forwards out
through the WAN interface. Give high priority to voice and video to make them run
more smoothly. Similarly, give low priority to many large file downloads so that
they do not reduce the quality of other applications.
Click Advanced > QoS > Class Setup to open the following screen.
Figure 83 Advanced > QoS > Class Setup
The following table describes the labels in this screen.
Table 64 Advanced > QoS > Class Setup
LABEL DESCRIPTION
Add Click this button to create a new classifier.
Order This field displays the order number of the classifier.
Active Select the check box to enable the classifier.
Class Name This is the name of the classifier.
Classification
Criteria
This shows criteria specified in this classifier, for example the interface
from which traffic of this class should come and the source MAC
address of traffic that matches this classifier.
Forward To This is the interface through which traffic that matches this classifier is
forwarded out.
DSCP Mark This is the DSCP number added to traffic of this classifier.
802.1P Mark This is the IEEE 802.1p priority level assigned to traffic of this
classifier.
VLAN ID Tag This is the VLAN ID number assigned to traffic of this classifier.
To Queue This is the name of the queue in which traffic of this classifier is put.
Modify Click the Edit icon to go to the screen where you can edit the
classifier.
Click the Remove icon to delete an existing classifier. Note that
subsequent rules move up by one when you take this action.
Apply Click this to save your changes back to the ZyXEL Device.
Cancel Click this to begin configuring this screen afresh.