Filter
Top Products
Chapter 22 Tools
P-2612HNU-Fx User’s Guide
256
After you see the Firmware Upload in Progress screen, wait two minutes
before logging into the ZyXEL Device again.
Figure 93 Firmware Upload In Progress
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 94 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Firmware screen.
Figure 95 Error Message
22.3 The Configuration Screen
See Section 22.5 on page 260 for transferring configuration files using FTP/TFTP
commands.