Filter
Top Products
Chapter 5 WAN Setup
P-2612HNU-Fx User’s Guide
112
5.3.1.4 Routing and DNS Server
Click Next in the screens shown in Section 5.3.1.3 on page 107. This screen
shows for both Ethernet and DSL WAN interfaces except when you select
Bridging as a service type.
Note: If you configure only one IPoA connection using the ATM interface on the
ZyXEL Device, you must enter the static DNS server address.
Figure 26 Network > WAN > Internet Connection: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
5.3.1.5 Configuration Summary
Click Next in the previous section to open this read-only screen that shows the
current WAN connection settings.
Table 19 Network > WAN > Internet Connection: PPPoE, PPPoA, IPoE or IPoA
LABEL DESCRIPTION
Selected WAN
Interfaces
Select a WAN interface through which you want to obtain a system
default server and DNS server.
Obtain DNS info
dynamically
Select this to have the ZyXEL Device use the DNS server addresses
assigned by your ISP.
Use the following
Static DNS IP
address
Select this to have the ZyXEL Device use the DNS server addresses
you configure manually.
Primary DNS
server
Enter the first DNS server address assigned by the ISP.
Secondary
DNS server
Enter the second DNS server address assigned by the ISP.
Back Click this button to return to the previous screen.
Next Click this button to continue.