Filter
Top Products
Chapter 4 Status Screens
P-2612HNU-Fx User’s Guide
90
4.2 DHCP Client List
Use this table to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Figure 9 Network > LAN > Client List
The following table describes the labels in this screen.
Table 5 Network > LAN > Client List
LABEL DESCRIPTION
IP Address Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
MAC Address Enter the MAC address of a computer on your LAN.
Add Click Add to add a static DHCP entry.
# This is the index number of the static IP table entry (row).
Status This field displays whether the client is connected to the ZyXEL Device.
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
Reserve Select the check box in the heading row to automatically select all
check boxes or select the check box(es) in each entry to have the
ZyXEL Device always assign the selected entry(ies)’s IP address(es) to
the corresponding MAC address(es) (and host name(s)). You can select
up to 128 entries in this table.
Apply Click this to save your changes back to the ZyXEL Device.
Reset Click this to begin configuring this screen afresh.
Refresh Click this to reload the DHCP table.