Filter
Top Products
Chapter 20 System
P-2612HNU-Fx User’s Guide
245
20.3 The Time Setting Screen
To change your ZyXEL Device’s time and date, click Maintenance > System >
Time Setting. The screen appears as shown. Use this screen to configure the
ZyXEL Device’s time based on your local time zone.
Figure 89 Maintenance > System > Time Setting
The following table describes the fields in this screen.
Table 71 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your ZyXEL Device.
Current Date This field displays the date of your ZyXEL Device.
Time and Date Setup
Get from Time
Server
Select this radio button to have the ZyXEL Device get the time and date
from the time server you specified below.
Time Protocol This shows the time service protocol that your time server sends when
you turn on the ZyXEL Device.
Time Server
Address
Enter the IP address or URL (up to 20 extended ASCII characters in
length) of your time server. Check with your ISP/network administrator
if you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).