Filter
Top Products
Chapter 16 Static Route
P-2612HNU-Fx User’s Guide
221
16.2.1 Static Route Add/Edit
Select a static route index number and click Add or Edit. The screen shown next
appears. Use this screen to configure the required information for a static route.
Figure 79 Advanced > Static Route > Add/Edit
The following table describes the labels in this screen.
Table 60 Advanced > Static Route > Add/Edit
LABEL DESCRIPTION
Active This field allows you to activate/deactivate this static route.
Route Name Enter the name of the IP static route. Leave this field blank to delete this
static route.
Destination IP
Address
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a
route to a single host, use a subnet mask of 255.255.255.255 in the
subnet mask field to force the network number to be identical to the host
ID.
IP Subnet
Mask
Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is a router or switch on
the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes back to the ZyXEL Device.
Reset Click this to begin configuring this screen afresh.