Filter
Top Products
Chapter 5 WAN Setup
P-2612HNU-Fx User’s Guide
108
Note: Make sure you have the correct account information from your ISP or network
administrator when configuring this screen.
Figure 22 Network > WAN > Internet Connection: PPPoE or PPPoA
The following table describes the labels in this screen.
Table 15 Network > WAN > Internet Connection: PPPoE or PPPoA
LABEL DESCRIPTION
PPP User Name Enter the user name exactly as your ISP assigned. If assigned a name
in the form user@domain where domain identifies a service name,
then enter both components exactly as given.
PPP Password Enter the password associated with the user name above.
PPPoE Service
Name
Type the name of your PPPoE service here.
This field is not available for a PPPoA connection (DSL WAN interface).
Authentication
Method
The ZyXEL Device supports PAP (Password Authentication Protocol)
and CHAP (Challenge Handshake Authentication Protocol). CHAP is
more secure than PAP; however, PAP is readily available on more
platforms.
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
AUTO - Your ZyXEL Device accepts either CHAP or PAP when
requested by this remote node.
CHAP - Your ZyXEL Device accepts CHAP only.
PAP - Your ZyXEL Device accepts PAP only.
MSCHAP - Your ZyXEL Device accepts MSCHAP only. MS-CHAP is the
Microsoft version of the CHAP.
Use Static IP
Address
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet. Select this if you do not have a dynamic IP
address.