Filter
Top Products
Chapter 7 Wireless LAN
P-2612HNU-Fx User’s Guide
141
Click Network > Wireless LAN > Security and select WPA or WPA2 from the
Security Mode list.
Figure 39 Network > Wireless LAN > Security: WPA/WPA2
The following table describes the wireless LAN security labels in this screen.
Table 28 Network > Wireless LAN > Security: WPA/WPA2
LABEL DESCRIPTION
SSID Select the SSID security profile you want to configure.
Security Mode Choose WPA or WPA2 from the drop-down list box.
WPA Compatible This field is only available for WPA2. Select this if you want the ZyXEL
Device to support WPA and WPA2 simultaneously.
Group Key
Update Timer
The Group Key Update Timer is the rate at which the AP (if using
WPA(2)-PSK key management) or RADIUS server (if using WPA(2)
key management) sends a new group key out to all clients. Setting of
the Group Key Update Timer is also supported in WPA(2)-PSK
mode. The ZyXEL Device default is 1800 seconds (30 minutes).
ReKey Method • The ZyXEL Device can automatically disconnect a wireless station
from the wired network after a period of inactivity or after a certain
number of packets have been processed. The wireless station
needs to enter the username and password again before access to
the wired network is allowed. Select TIME to have the ZyXEL
Device automatically disconnects a wireless station from the wired
network after a period of inactivity.
•Select PKT to have the ZyXEL Device automatically disconnects a
wireless station from the wired network after a certain number of
packets have been processed.
•Select NONE if you do not want the connection between the ZyXEL
Device and a wireless station to time out.