Filter
Top Products
Chapter 5 WAN Setup
P-2612HNU-Fx User’s Guide
113
This screens shows for all WAN interface and service types as well as all DSL link
types as the last step in the WAN setup process.
Figure 27 Network > WAN > Internet Connection: WAN Configuration Summary
The following table describes the labels in this screen.
5.4 Technical Reference
The following section contains additional technical information about the ZyXEL
Device features described in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The ZyXEL Device
can work in bridge mode or routing mode. When the ZyXEL Device is in routing
mode, it supports the following methods.
IP over Ethernet
IP over Ethernet (IPoE) is an alternative to PPPoE. IP packets are being delivered
across an Ethernet network, without using PPP encapsulation. They are routed
Table 20 WAN Configuration: Configuration Summary
LABEL DESCRIPTION
Connection Type This is the encapsulation method used by this connection.
Service Name This is the name of the service.
IP Address This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
NAT This shows whether NAT is active or not for this connection.
IGMP Multicast This shows whether IGMP multicasting is active or not for this
connection.
Back Click this button to return to the previous screen.
Apply/Save Click this button to save your changes.