Filter
Top Products
P-2612HNU-Fx User’s Guide
219
CHAPTER 16
Static Route
16.1 Overview
The ZyXEL Device usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the ZyXEL Device send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL
Device’s LAN interface. The ZyXEL Device routes most traffic from A to the
Internet through the ZyXEL Device’s default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 77 Example of Static Routing Topology
16.1.1 What You Can Do in this Chapter
Use the Static Route screens (Section 16.2 on page 220) to view and configure
IP static routes on the ZyXEL Device.
WAN
R1
R2
A
R3
LAN