Filter
Top Products
Chapter 7 Wireless LAN
P-2612HNU-Fx User’s Guide
143
The following table describes the labels in this screen.
7.5 WPS
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See Appendix D on page
345 for more information about WPS.
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
Section 7.2 on page 133). If you want to use the WPS feature, make sure you
have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No
Security.
Table 29 Network > Wireless LAN > QoS
LABEL DESCRIPTION
Enable WMM of
SSID1~4
Check this to have the ZyXEL Device automatically give a service a
priority level according to the ToS value in the IP header of packets it
sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority
to voice and video, which makes them run more smoothly.
Enable WMM
Automatic
Power Save
Deliver (APSD)
Click this to increase battery life for battery-powered wireless clients.
APSD uses a longer beacon interval when transmitting traffic that does
not require a short packet exchange interval.
Apply Click this to save your changes back to the ZyXEL Device.