Filter
Top Products
Chapter 7 Wireless LAN
P-2612HNU-Fx User’s Guide
142
7.4 The QoS Screen
This screen allows you to enable or disable wireless quality of service.
Click Network > Wireless LAN > QoS. The following screen displays.
Figure 40 Network > Wireless LAN > QoS
Encryption Type Select TKIP to enable Temporal Key Integrity Protocol (TKIP) security
on your wireless network. Use this if the other access points on your
network support do not have an AES option.
Select AES to enable Advanced Encryption System (AES) security on
your wireless network. AES provides superior security to TKIP. Use
AES if the other access points on your network support it.
Select TKIPAES MIX to allow both TKIP and AES types of security in
your wireless network.
Radius
Server IP
Address
Enter the IP address of the external authentication server in dotted
decimal notation.
Server Port Enter the port number of the external authentication server. The
default port number is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Share Secret Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyXEL
Device.
The key must be the same on the external authentication server and
your ZyXEL Device. The key is not sent over the network.
Apply Click this to save your changes back to the ZyXEL Device.
Reset Click this to reload the previous configuration for this screen.
Table 28 Network > Wireless LAN > Security: WPA/WPA2
LABEL DESCRIPTION