Filter
Top Products
Chapter 7 Wireless LAN
P-2612HNU-Fx User’s Guide
134
Click Network > Wireless LAN to open the General screen.
Figure 34 Network > Wireless LAN > General
The following table describes the labels in this screen.
Table 24 Network > Wireless LAN > General
LABEL DESCRIPTION
Enable
Wireless LAN
Check this to activate wireless LAN.
Multiple SSID Check this to have the ZyXEL Device broadcast more than one SSID.
SSID1
~
SSID 4
The SSID (Service Set IDentity) identifies the service set with which a
wireless device is associated. Wireless devices associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Enter the SSID you want to use. If you want to use more than one SSID,
check Multiple SSID, enter the SSID(s) in the field(s) and click Enable.
You can enable up to four
SSIDs simultaneously, and each SSID can
have its own security configuration (refer to
Section 7.3 on page 136
for setting the wireless security).
Note: SSID1 is enabled by default and cannot be disabled.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.