Filter
Top Products
Chapter 3 Tutorial
P-2612HNU-Fx User’s Guide
34
Hardware Preparation
1 Check the back panel of your device where the Ethernet ports are located and
make sure the DSL/WAN switch is pointing up.
2 Connect one end of an Ethernet cable to the DSL port of your ZyXEL Device. The
other end should be connected to the DSL port in your house or a DSL router/
modem provided by your ISP.
3 Connect one end of another Ethernet cable to an Ethernet port on the ZyXEL
Device and the other end to a computer that you will use to access the Web
Configurator.
4 Connect the ZyXEL Device to a power source, turn it on and wait for the POWER
LED to become a steady green. Turn on the modem provided by your ISP as well
as the computer.
Account Configuration
1 Click Network > WAN > Layer 2 Interface to open the following screen. Select
DSL (ATM) as the Interface and click Add.
2 For this example, the DSL connection has the following information.