Filter
Top Products
Chapter 13 MAC Filter
P-2612HNU-Fx User’s Guide
202
13.2 MAC Filter Screen
To change your ZyXEL Device’s MAC filter settings, click Security > MAC Filter.
The screen appears as shown.
Figure 68 Security > MAC Filter
The following table describes the labels in this menu.
Table 53 Security > MAC Filter
LABEL DESCRIPTION
Active Check this to enable MAC address filtering.
Set This is the index number of the MAC address.
Allow Select Allow to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
If you clear this, the MAC Address field for this set clears.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a
valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Apply Click this to save your changes back to the ZyXEL Device.
Reset Click this to reload the previous configuration for this screen.